Englander Pellet Stove Vacuum Hose Kit, PU-VH Englander

Englander Pellet Stove Vacuum Hose Kit

Englander Pellet Stove Vacuum Pressure Hose Kit PU-VH for vacuum shut-down and firebox pressure switches. 5 feet of hose (way more than enough), includes clips. Fits ALL England’s Stove Works Pellet Stoves to include: Englander, Summers Heat and Timber Ridge. This hose can be used on most any pellet stove with a vacuum switch. 

Englander’s double auger pellet stoves are some of the most popular pellet stoves in the world (PDV, PDVC models). 

E1 code followed by an E2 code at or during startup.

On the top or the back of the combustion blower manifold, there is a hose connected to the pressure switch. This hose is made of low-temperature silicon which, dries out overtime where it connects to the manifold and becomes brittle.

Air will leak around the hose and this point and the pressure switches contacts will open and trigger the error code.

This hose is longer than it needs to be and can be cut a few times. Simply cut off about an inch or somewhere up the hose to a point that’s not brittle and reinsert the hose back on the barb.

Eventually, the hose will need to be replaced. If this does not solve the problem, make sure your venting is free and clear; verify that the combustion blower is spinning…if both are true, then replace the vacuum shutdown switch.